How To Change From X Sources To C
#16 
notre
- Topic Starter
-
- Members
- 48 posts
- OFFLINE
- Local time: 01:00 PM
Posted 12 May 2020 - 03:52 PM
I tin't discover a fashion to post/upload an zipper of the picture I took to this forum. I see My Media, and information technology talks about files I uploaded, but I don't see anywhere to actually upload information technology. If at that place's no manner to upload, I'll blazon it out...
-
Back to top
BC AdBot (Login to Remove)
-
- BleepingComputer.com
- Register to remove ads
#17
JohnC_21
-
- Members
- 31,725 posts
- OFFLINE
- Gender: Male
- Local fourth dimension: 03:00 PM
Posted 12 May 2020 - 03:57 PM
Click More Reply Options next to the post button and and then attach the image. If you cannot exercise that then use an image hosting service.
Edit: You tin can copy the output to a text file then paste it into your post. Click on the small terminal in the menu bar of the command prompt window and select Edit > Select All. Then Edit > Copy. Ctrl + V will paste the selection into your post.
Edited by JohnC_21, 12 May 2020 - 04:02 PM.
- Back to meridian
#eighteen
notre
- Topic Starter
-
- Members
- 48 posts
- OFFLINE
- Local fourth dimension: 01:00 PM
Posted 12 May 2020 - 04:08 PM
Good call re: re-create/paste. Here'due south the output.
Microsoft Windows [Version 6.3.9600] X:\Sources>diskpart Microsoft DiskPart version 6.three.9600 Copyright (C) 1999-2013 Microsoft Corporation. On computer: MININT-8BHK7K9 DISKPART> list volume Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- -------- Book 0 F DVD-ROM 0 B No Media Book 1 C Os NTFS Sectionalisation 919 GB Healthy Book 2 ESP FAT32 Partitioning 500 MB Healthy Hidden Book three WINRETOOLS NTFS Partition 750 MB Healthy Hidden Book 4 NTFS Division 450 MB Healthy Hidden Volume 5 PBR Epitome NTFS Partition 10 GB Good for you Hidden Volume half-dozen D IR5_CCSA_X6 FAT32 Removable 7681 MB Healthy Volume vii E Removable 0 B No Media Book 8 DIAGS FAT32 Division 40 MB Healthy Hidden DISKPART> listing deejay Deejay ### Status Size Complimentary Dyn Gpt -------- ------------- ------- ------- --- --- Disk 0 Online 931 GB 0 B * Disk one Online 7683 MB 0 B * Disk 2 No Media 0 B 0 B DISKPART> select deejay 0 Deejay 0 is at present the selected deejay. DISKPART> list partition Partition ### Blazon Size Offset ------------- ---------------- ------- ------- Sectionalisation one System 500 MB 1024 KB Partition ii OEM forty MB 501 MB Sectionalisation 3 Reserved 128 MB 541 MB Partition 4 Recovery 750 MB 669 MB Partition 5 Primary 919 GB 1419 MB Partition 6 Recovery 450 MB 920 GB Partition 7 Recovery x GB 921 GB DISKPART>
- Back to top
#nineteen
JohnC_21
-
- Members
- 31,725 posts
- OFFLINE
- Gender: Male person
- Local time: 03:00 PM
Posted 12 May 2020 - 04:11 PM
1 more than. At the command prompt type:
bcdedit
mail the output.
- Back to peak
#xx
notre
- Topic Starter
-
- Members
- 48 posts
- OFFLINE
- Local fourth dimension: 01:00 PM
Posted 12 May 2020 - 04:xvi PM
X:\Sources>bcdedit Windows Boot Director -------------------- identifier {bootmgr} device sectionalisation=\Device\HarddiskVolume3 path \EFI\Microsoft\Kick\bootmgfw.efi description Windows Kicking Manager locale en-us inherit {globalsettings} default {default} resumeobject {dc6d1c73-29bd-11e4-b156-b083fe53fedc} displayorder {default} toolsdisplayorder {memdiag} timeout thirty Windows Boot Loader ------------------- identifier {default} device partitioning=C: path \Windows\system32\winload.efi clarification Windows viii.1 locale en-us inherit {bootloadersettings} isolatedcontext Yeah allowedinmemorysettings 0x15000075 osdevice division=C: systemroot \Windows resumeobject {dc6d1c73-29bd-11e4-b156-b083fe53fedc} nx OptIn bootmenupolicy Standard detecthal Aye Ten:\Sources> - Dorsum to top
#21
JohnC_21
-
- Members
- 31,725 posts
- OFFLINE
- Gender: Male person
- Local time: 03:00 PM
Posted 12 May 2020 - 04:25 PM
So far everything looks normal. Now these commands.
diskpart
listing deejay
select disk 0
list sectionalization
select partition 1 This should be the 500MB System partition
particular partition
post the output
Edit: I was in error with the bcdedit command because it was for X:\sources. I believe the prompt needs to modify to C:\ earlier using the bcdedit command.
Edited by JohnC_21, 12 May 2020 - 04:43 PM.
- Back to superlative
#22
notre
- Topic Starter
-
- Members
- 48 posts
- OFFLINE
- Local time: 01:00 PM
Posted 12 May 2020 - 05:22 PM
Ok, here is the additional commands, plus bcdedit again.
C:\>diskpart Microsoft DiskPart version 6.iii.9600 Copyright (C) 1999-2013 Microsoft Corporation. On computer: MININT-8BHK7K9 DISKPART> listing disk Deejay ### Status Size Gratis Dyn Gpt -------- ------------- ------- ------- --- --- Disk 0 Online 931 GB 0 B * Disk 1 Online 7683 MB 0 B * Disk 2 No Media 0 B 0 B DISKPART> select disk 0 Deejay 0 is now the selected disk. DISKPART> list partition Partition ### Type Size Start ------------- ---------------- ------- ------- Partition 1 System 500 MB 1024 KB Partition two OEM 40 MB 501 MB Division 3 Reserved 128 MB 541 MB Partitioning four Recovery 750 MB 669 MB Partition 5 Principal 919 GB 1419 MB Partition 6 Recovery 450 MB 920 GB Partitioning 7 Recovery 10 GB 921 GB DISKPART> select sectionalization 1 Partition 1 is now the selected partition. DISKPART> item partition Partitioning one Type : c12a7328-f81f-11d2-ba4b-00a0c93ec93b Hidden : Yes Required: No Attrib : 0X8000000000000000 Offset in Bytes: 1048576 Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- -------- * Volume two ESP FAT32 Partition 500 MB Healthy Hidden DISKPART> exit Leaving DiskPart... C:\>bcdedit Windows Kick Manager -------------------- identifier {bootmgr} device partition=\Device\HarddiskVolume3 path \EFI\Microsoft\Boot\bootmgfw.efi description Windows Boot Managing director locale en-us inherit {globalsettings} default {default} resumeobject {dc6d1c73-29bd-11e4-b156-b083fe53fedc} displayorder {default} toolsdisplayorder {memdiag} timeout 30 Windows Boot Loader ------------------- identifier {default} device partition=C: path \Windows\system32\winload.efi description Windows 8.i locale en-us inherit {bootloadersettings} isolatedcontext Yes allowedinmemorysettings 0x15000075 osdevice segmentation=C: systemroot \Windows resumeobject {dc6d1c73-29bd-11e4-b156-b083fe53fedc} nx OptIn bootmenupolicy Standard detecthal Aye C:\> - Dorsum to top
#23
JohnC_21
-
- Members
- 31,725 posts
- OFFLINE
- Gender: Male
- Local fourth dimension: 03:00 PM
Posted 12 May 2020 - 05:36 PM
I'm non 100% on this but I would thinksegmentation = \Device\HarddiskVolume3 should be sectionalization = \Device\HarddiskVolume2 as that is where the EFI directory is located. I'm not sure how to fix this other than to see if rebuilding the bcd works.
https://www.thewindowsclub.com/rebuild-bcd-windows-ten
You don't need the fixmbr command as it is only used on MBR disks and your's is GPT.
If rebuilding the BCD does non work so don't use the bcdboot command as shown in the link. There are some additional steps required considering of the EFI partition.
- Back to top
#24
notre
- Topic Starter
-
- Members
- 48 posts
- OFFLINE
- Local time: 01:00 PM
Posted 12 May 2020 - 06:11 PM
This is my results:
C:\>bootrec /rebuildbcd Scanning all disks for Windows installations. Please wait, since this may take a while... Successfully scanned Windows installations. Total identified Windows installations: 0 The functioning completed successfully. C:\>
The article did mention trying to set a path. Should I set that? If so, I guess:
bcdboot c:\windows /s c:
- Dorsum to peak
#25
JohnC_21
-
- Members
- 31,725 posts
- OFFLINE
- Gender: Male
- Local fourth dimension: 03:00 PM
Posted 12 May 2020 - 06:27 PM
You can see if the bcdboot command works. With the EFI system partition I would practice this showtime and then the bcdboot command you posted.
Assign a drive letter to the EFI (ESP) book which is number 2 in postal service #18.
diskpart
list book
select volume 2 Make sure this is the ESP volume
assign letter=Thousand It tin be any letter of the alphabet that is not used
list volume check to make sure book two at present has a letter
Now that the ESP division now has a letter of Yard do the following bcdboot command.
bcdboot C:\Windows /s G: /f UEFI
Kicking and if it still fails use Edit: I would rebuild the BCD over again and run into if information technology now sees the Windows install.
bcdboot c : \windows / s c :
Edited by JohnC_21, 12 May 2020 - 06:30 PM.
- Back to top
#26
notre
- Topic Starter
-
- Members
- 48 posts
- OFFLINE
- Local fourth dimension: 01:00 PM
Posted 12 May 2020 - 06:45 PM
You can see if the bcdboot command works. With the EFI organisation division I would do this first so the bcdboot command y'all posted.
Assign a drive letter to the EFI (ESP) volume which is number 2 in postal service #18.
diskpart
list book
select volume 2 Make certain this is the ESP volume
assign letter=Yard It tin can be any letter that is not used
list volume check to make sure volume 2 at present has a letter of the alphabet
Now that the ESP partition now has a alphabetic character of G exercise the post-obit bcdboot command.
bcdboot C:\Windows /s M: /f UEFIBoot and if it still fails apply Edit: I would rebuild the BCD once more and see if it now sees the Windows install.
bcdboot c:\windows /s c:
I followed your step upwardly until (and including) this line:
bcdboot C:\Windows /s G: /f UEFI
The output of the control said it was successful; different before attempts it didn't talk about 0 windows installations found. At betoken, I exited the control shell and rebooted. But, same results. I wasn't clear on what you wanted me try, when this didn't succeed.
Edited by notre, 12 May 2020 - 06:46 PM.
- Back to peak
#27
JohnC_21
-
- Members
- 31,725 posts
- OFFLINE
- Gender: Male
- Local time: 03:00 PM
Posted 12 May 2020 - 07:24 PM
This command.
bcdboot c : \windows / s c :
If the in a higher place command does not kick then I am out of ideas, sorry. I would say to fill-in all your data including browser bookmarks with the linux disk then do a clean install of Windows viii.one with your USB. If this is an OEM computer similar HP or Dell then the key is in firmware and Windows will activate one time online.
After all your programs are reinstalled and the OS updated consider doing regular deejay image backups to a USB external drive with software similar Macrium Free or Aomei Backupper Standard. They let you create a bootable USB flash bulldoze of the software so you tin recover the image from the USB external fifty-fifty if Windows does not boot. If the drive fails yous can supervene upon the drive and restore the paradigm without the need to partitioning and format the disk.
- Dorsum to height
#28
pcpunk
-
- Members
- xiv,119 posts
- ONLINE
- Gender: Male
- Location: The states of A
- Local time: 03:00 PM
Posted 12 May 2020 - 07:37 PM
Looks like a failed Windows x Upgrade to me, what do you lot think John?
If I don't reply right away information technology'due south because I'chiliad waiting for Windows x to Update.
eps1.0_hellofriend.mov_mr_robot
"I one time spent two hours on the telephone waiting to speak with HP Customer Service to complain about HP Customer Service" -Dr. Sheldon Cooper
- Back to elevation
#29
notre
- Topic Starter
-
- Members
- 48 posts
- OFFLINE
- Local time: 01:00 PM
Posted 12 May 2020 - 07:41 PM
Ok, I tried this:
bcdboot c:\windows /s c:
only unfortunately, still no joy.
One concluding question. The computer is indeed a Dell, so do you lot think that any arbitrary install media (including the one I got by downloading the ISO from MS) will work to recognize the production? If so, at least that'due south great news. I was worried nearly my friend having to try to notice the original install media (if indeed there was one other than a partition on the drive), or some printed documentation with the product key on it.
I desire to thank everyone who assisted in this thread, especially John and pcpunk. While a solution wasn't constitute, it certainly wasn't for lack of trying. My experience on this forum has been splendid. Cheers.
Edited by notre, 12 May 2020 - 07:42 PM.
- Dorsum to top
#30
JohnC_21
-
- Members
- 31,725 posts
- OFFLINE
- Gender: Male person
- Local fourth dimension: 03:00 PM
Posted 12 May 2020 - 07:53 PM
Yes, the WIndows 8.1 disk volition work on your reckoner. You lot will need to pre download some drivers like the Wifi and Ethernet. Your partitioning #10 marked recovery is 10GB. This is probably Dells factory recovery partitioning. If the figurer came pre-installed with 8.one and not 8 you may be able to do a manufacturing plant reset using the below process.
Kicking Windows and when you see the spinning circle press the ability push button to turn off the computer. Do this two more than times and you should get the advanced kicking options to allow a reset of Windows under Troubleshoot > Advanced Options. A System Restore may as well piece of work.
This BC link shows how to practise a clean install. It's for Windows 10 but the same steps are adept for 8.1
https://world wide web.bleepingcomputer.com/forums/t/667627/doing-a-completely-make clean-install-of-windows-10/
Looks similar a failed Windows 10 Upgrade to me, what practice yous think John?
The OP did an upgrade to 10 and information technology failed? I didn't see that.
Edited past JohnC_21, 12 May 2020 - 07:54 PM.
- Dorsum to top
Source: https://www.bleepingcomputer.com/forums/t/719570/trouble-booting-computer/page-2
Posted by: ammonsmucithe.blogspot.com
0 Response to "How To Change From X Sources To C"
Post a Comment